Global Fastening Customization Solutions Supplier

Wolkom by AYA | Blêdwizer dizze side | Offisjele telefoannûmer: 311-6603-1296

facebook twitter linkedin instagram youtube pinterest
English
page_banner

Products

Stainless Steel Socket Head Cap Bolts Featured Image
  • Stainless Steel Socket Head Cap Bolts
  • Stainless Steel Socket Head Cap Bolts

Stainless Steel Socket Head Cap Bolts

Oersicht:

Commodity: Stainless Steel Allen Head Bolts
Materiaal: Makke fan 316 roestfrij stiel, dizze skroeven hawwe goede gemyske wjerstân en kinne mild magnetysk wêze. Se wurde ek bekend as A2 roestfrij stiel.
Head Type: Socket Head.
Lengte: wurdt mjitten fan ûnder de holle.
Metrike skroeven wurde ek bekend as A2 roestfrij stiel skroeven.
Soart tried: grof tried, fyn tried. Grof triedden binne de yndustry standert; kies dizze screws as jo net witte de toanhichte of triedden per inch. Fijne en ekstra-fine triedden binne nau ôfstân om foar te kommen loosening út trilling; hoe fyner de tried, hoe better de wjerstân.
Standert: Schroeven dy't foldogge oan ASME B1.1, ASME B18.3, ISO 21269 en ISO 4762 (earder DIN 912) foldogge oan noarmen foar ôfmjittings. Skroeven dy't foldogge oan ASTM B456 en ASTM F837 foldogge oan noarmen foar materialen.


Spesifikaasjes

Dimension Table

Wêrom AYA

Produkt Beskriuwing

Produkt Namme Stainless Steel Allen Head Bolts
Materiaal Makke fan 316 roestfrij stiel, dizze skroeven hawwe goede gemyske wjerstân en kinne mild magnetysk wêze. Se wurde ek bekend as A2 roestfrij stiel.
Head Type Socket Head
Lingte It wurdt mjitten fan ûnder de holle
Thread Type Grof tried, fyn tried. Grof triedden binne de yndustry standert; kies dizze screws as jo net witte de toanhichte of triedden per inch. Fijne en ekstra-fine triedden binne nau ôfstân om foar te kommen loosening út trilling; hoe fyner de tried, hoe better de wjerstân.
Standert Screws dy't foldogge oan ASME B18.2.1 of earder DIN 933 spesifikaasjes foldogge oan dizze dimensional noarmen.
  • Foarige:
  • Folgjende:

    • Stainless Steel Allen Head Bolts-dimension tafel

    ISO 21269

    ASME B18.3

    Grutte 0# 1# 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16
    d Screw Diameter 0.06 0.073 0.086 0.099 0.112 0.125 0.138 0.164 0.19 0.216 0.25 0.3125
    PP UNC - 64 56 48 40 40 32 32 24 24 20 18
    UNF 80 72 64 56 48 44 40 36 32 28 28 24
    UNEF - - - - - - - - - 32 32 32
    ds max = nominale grutte 0.06 0.073 0.086 0.099 0.112 0.125 0.138 0.164 0.19 0.216 0.25 0.3125
    min 0.0568 0.0695 0.0822 0.0949 0.1075 0.1202 0.1329 0.1585 0.184 0.2095 0.2435 0.3053
    dk max 0.096 0.118 0.14 0.161 0.183 0.205 0.226 0.27 0.312 0.324 0.375 0.469
    min 0.091 0.112 0.134 0.154 0.176 0.198 0.216 0.257 0.298 0.314 0.354 0.446
    k max 0.06 0.073 0.086 0.099 0.112 0.125 0.138 0.164 0.19 0.216 0.25 0.312
    min 0.057 0.07 0.083 0.095 0.108 0.121 0.134 0.159 0.185 0.21 0.244 0.306
    s Nominale Grutte 0.05 0.062 0.078 0.078 0.094 0.094 0.109 0.141 0.156 0.156 0.188 0.25
    t min 0.025 0.031 0.038 0.044 0.051 0.057 0.064 0.077 0.09 0.103 0.12 0.151
    b min 0.5 0.62 0.62 0.62 0,75 0,75 0,75 0.88 0.88 0.88 1 1.12
    c schuin of radius 0.004 0.005 0.008 0.008 0.009 0.012 0.013 0.014 0.018 0.022 0.025 0.033
    r schuin of radius 0.007 0.007 0.007 0.007 0.008 0.008 0.008 0.008 0.008 0.01 0.01 0.01
    w min 0.02 0.025 0.029 0.034 0.038 0.043 0.047 0.056 0.065 0.082 0.095 0.119
    Grutte 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2
    d Screw Diameter 0.375 0.4375 0.5 0.5625 0.625 0,75 0.875 1 1.125 1.25 1.375 1.5
    PP UNC 16 14 13 12 11 10 9 8 7 7 6 6
    UNF 24 20 20 18 18 16 14 12 12 12 12 12
    UNEF 32 28 28 24 24 20 20 20 18 18 18 18
    ds max = nominale grutte 0.375 0.4375 0.5 0.5625 0.625 0,75 0.875 1 1.125 1.25 1.375 1.5
    min 0.3678 0.4294 0.4919 0.5538 0.6163 0.7406 0.8647 0.9886 1.1086 1.2336 1.3568 1.4818
    dk max 0.562 0.656 0,75 0.843 0.938 1.125 1.312 1.5 1.688 1.875 2.062 2.25
    min 0.54 0.631 0.725 0.827 0.914 1.094 1.291 1.476 1.665 1.852 2.038 2.224
    k max 0.375 0.438 0.5 0.562 0.625 0,75 0.875 1 1.125 1.25 1.375 1.5
    min 0.368 0.43 0.492 0.554 0.616 0.74 0.864 0.988 1.111 1.236 1.36 1.485
    s Nominale Grutte 0.312 0.375 0.375 0.437 0.5 0.625 0,75 0,75 0.875 0.875 1 1
    t min 0.182 0.213 0.245 0.276 0.307 0.37 0.432 0.495 0.557 0.62 0.682 0.745
    b min 1.25 1.38 1.5 1.5 1.75 2 2.25 2.5 2.81 3.12 3.44 3.75
    c schuin of radius 0.04 0.047 0.055 0.062 0.07 0.085 0.1 0.114 0.129 0.144 0.16 0.176
    r schuin of radius 0.01 0.015 0.015 0.015 0.015 0.015 0.02 0.02 0.02 0.02 0.02 0.02
    w min 0.143 0.166 0.19 0.214 0.238 0.285 0.333 0.38 0.428 0.475 0.523 0.57

     

    Grutte 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4
    d Screw Diameter 1.75 2 2.25 2.5 2.75 3 3.25 3.5 3.75 4
    PP UNC 5 4.5 4.5 4 4 4 4 4 4 4
    UNF - - - - - - - - - -
    UNEF - - - - - - - - - -
    ds max = nominale grutte 1.75 2 2.25 2.5 2.75 3 3.25 3.5 3.75 4
    min 1.7295 1.978 2.228 2.4762 2.7262 2.9762 3.2262 3.4762 3.7262 3.9762
    dk max 2.625 3 3.375 3.75 4.125 4.5 4.875 5.25 5.625 6
    min 2.597 2.97 3.344 3.717 4.09 4.464 4.837 5.211 5.584 5.958
    k max 1.75 2 2.25 2.5 2.75 3 3.25 3.5 3.75 4
    min 1.734 1.983 2.232 2.481 2.73 2.979 3.228 3.478 3.727 3.976
    s Nominale Grutte 1.25 1.5 1.75 1.75 2 2.25 2.25 2.75 2.75 3
    t min 0.87 0.995 1.12 1.245 1.37 1.495 1.62 1.745 1.87 1.995
    b min 4.38 5 5.62 6.25 6.88 7.5 8.12 8.75 9.38 10
    c schuin of radius 0.207 0.238 0.269 0.3 0.332 0.363 0.394 0.426 0.458 0.489
    r schuin of radius 0.02 0.02 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036
    w min 0.665 0.76 0.855 0,95 1.045 1.14 1.235 1.33 1.425 1.52
    Screw Thread M8 M10 M12 M14 M16 M20 M24 M30 M36 M42 M48 M56 M64
    d
    P Pitch Fijne tried -1 1 1.25 1.5 1.5 1.5 2 2 2 3 3 3 4 4
    Fijne tried -2 / 1 1.25 / / 1.5 / / / / / / /
    dk max Foar gewoane koppen 13 16 18 21 24 30 36 45 54 63 72 84 96
    Foar knurled hollen 13.27 16.27 18.27 21.33 24.33 30.33 36.39 45.39 54.46 63.46 72.46 84.54 96.54
    min 12.73 15.73 17.73 20.67 23.67 29.67 35.61 44.61 53.54 62.54 71.54 83.46 95.46
    ds max 8 10 12 14 16 20 24 30 36 42 48 56 64
    min 7.78 9.78 11.73 13.73 15.73 19.67 23.67 29.67 35.61 41.61 47.61 55.54 63.54
    k max 8 10 12 14 16 20 24 30 36 42 48 56 64
    min 7.64 9.64 11.57 13.57 15.57 19.48 23.48 29.48 35.38 41.38 47.38 56.26 63.26
    s Nominale Grutte 6 8 10 12 14 17 19 22 27 32 36 41 46
    max 6.14 8.175 10.175 12.212 14.212 17.23 19.275 22.275 27.275 32.33 36.33 41.33 46.33
    min 6.02 8.025 10.025 12.032 14.032 17.05 19.065 22.065 27.065 32.08 36.08 41.08 46.08
    t min 4 5 6 7 8 10 12 15.5 19 24 28 34 38

    ISO 4762

    Screw Thread M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M12
    d
    P Pitch 0.35 0.4 0,45 0.5 0.7 0.8 1 1.25 1.5 1.75
    dk max Foar gewoane koppen 3 3.8 4.5 5.5 7 8.5 10 13 16 18
    Foar knurled hollen 3.14 3.98 4.68 5.68 7.22 8.72 10.22 13.27 16.27 18.27
    min 2.86 3.62 4.32 5.32 6.78 8.28 9.78 12.73 15.73 17.73
    da max 2 2.6 3.1 3.6 4.7 5.7 6.8 9.2 11.2 13.7
    ds max 1.6 2 2.5 3 4 5 6 8 10 12
    min 1.46 1.86 2.36 2.86 3.82 4.82 5.82 7.78 9.78 11.73
    e min 1.733 1.733 2.303 2.873 3.443 4.583 5.723 6.863 9.149 11.429
    k max 1.6 2 2.5 3 4 5 6 8 10 12
    min 1.46 1.86 2.36 2.86 3.82 4.82 5.7 7.64 9.64 11.57
    s Nominale Grutte 1.5 1.5 2 2.5 3 4 5 6 8 10
    max 1.58 1.58 2.08 2.58 3.08 4.095 5.14 6.14 8.175 10.175
    min 1.52 1.52 2.02 2.52 3.02 4.02 5.02 6.02 8.025 10.025
    t min 0.7 1 1.1 1.3 2 2.5 3 4 5 6
    w min 0,55 0,55 0.85 1.15 1.4 1.9 2.3 3.3 4 4.8
    Screw Thread (M14) M16 M20 M24 M30 M36 M42 M48 M56 M64
    d
    P Pitch 2 2 2.5 3 3.5 4 4.5 5 5.5 6
    dk max Foar gewoane koppen 21 24 30 36 45 54 63 72 84 96
    Foar knurled hollen 21.33 24.33 30.33 36.39 45.39 54.46 63.46 72.46 84.54 96.54
    min 20.67 23.67 29.67 35.61 44.61 53.54 62.54 71.54 83.46 95.46
    da max 15.7 17.7 22.4 26.4 33.4 39.4 45,6 52.6 63 71
    ds max 14 16 20 24 30 36 42 48 56 64
    min 13.73 15.73 19.67 23.67 29.67 35.61 41.61 47.61 55.54 63.54
    e min 13.716 15.996 19.437 21.734 25.154 30.854 36.571 41.131 46.831 52.531
    k max 14 16 20 24 30 36 42 48 56 64
    min 13.57 15.57 19.48 23.48 29.48 35.38 41.38 47.38 55.26 63.26
    s Nominale Grutte 12 14 17 19 22 27 32 36 41 46
    max 12.212 14.212 17.23 19.275 22.275 27.275 32.33 36.33 41.33 46.33
    min 12.032 14.032 17.05 19.065 22.065 27.065 32.08 36.08 41.08 46.08
    t min 7 8 10 12 15.5 19 24 28 34 38
    w min 5.8 6.8 8.6 10.4 13.1 15.3 16.3 17.5 19 22

    DIN 912

    Screw Thread (M14) M16 M20 M24 M30 M36 M42 M48 M56 M64
    d
    P Pitch 2 2 2.5 3 3.5 4 4.5 5 5.5 6
    dk max Foar gewoane koppen 21 24 30 36 45 54 63 72 84 96
    Foar knurled hollen 21.33 24.33 30.33 36.39 45.39 54.46 63.46 72.46 84.54 96.54
    min 20.67 23.67 29.67 35.61 44.61 53.54 62.54 71.54 83.46 95.46
    da max 15.7 17.7 22.4 26.4 33.4 39.4 45,6 52.6 63 71
    ds max 14 16 20 24 30 36 42 48 56 64
    min 13.73 15.73 19.67 23.67 29.67 35.61 41.61 47.61 55.54 63.54
    e min 13.716 15.996 19.437 21.734 25.154 30.854 36.571 41.131 46.831 52.531
    k max 14 16 20 24 30 36 42 48 56 64
    min 13.57 15.57 19.48 23.48 29.48 35.38 41.38 47.38 55.26 63.26
    s Nominale Grutte 12 14 17 19 22 27 32 36 41 46
    max 12.212 14.212 17.23 19.275 22.275 27.275 32.33 36.33 41.33 46.33
    min 12.032 14.032 17.05 19.065 22.065 27.065 32.08 36.08 41.08 46.08
    t min 7 8 10 12 15.5 19 24 28 34 38
    w min 5.8 6.8 8.6 10.4 13.1 15.3 16.3 17.5 19 22
    Screw Thread M12 (M14) M16 (M18) M20 (M22) M24 (M27) M30 (M33)
    d
    P Pitch Grof tried 1.75 2 2 2.5 2.5 2.5 3 3 3.5 3.5
    Fine tried pitch-1 1.25 1.5 1.5 1.5 1.5 1.5 2 2 2 2
    Fine tried pitch-2 1.5 - - 2 2 2 - - - -
    dk gewoane kop max 18 21 24 27 30 33 36 40 45 50
    knibbele koppen max 18.27 21.33 24.33 27.33 30.33 33.39 36.39 40.39 45.39 50.39
    min 17.73 20.67 23.67 26.67 29.67 32.61 35.61 39.61 44.61 49.61
    da max 13.7 15.7 17.7 20.2 22.4 24.4 26.4 30.4 33.4 36.4
    ds max 12 14 16 18 20 22 24 27 30 33
    min 11.73 13.73 15.73 17.73 19.67 21.67 23.67 26.67 29.67 32.61
    e min 11.43 13.72 16 16 19.44 19.44 21.73 21.73 25.15 27.43
    k max 12 14 16 18 20 22 24 27 30 33
    min 11.57 13.57 15.57 17.57 19.48 21.48 23.48 26.48 29.48 32.38
    s Nominale Grutte 10 12 14 14 17 17 19 19 22 24
    min 10.025 12.032 14.032 14.032 17.05 17.05 19.065 19.065 22.065 24.065
    max 10.175 12.212 14.212 14.212 17.23 17.23 19.275 19.275 22.275 24.275
    t min 6 7 8 9 10 11 12 13.5 15.5 18
    w min 4.8 5.8 6.8 7.8 8.6 9.4 10.4 11.9 13.1 13.5
    Screw Thread M36 M42 M48 M56 M64 M72 M80 M90 M100
    d
    P Pitch Grof tried 4 4.5 5 5.5 6 6 6 6 6
    Fine tried pitch-1 3 3 3 4 4 4 4 4 4
    Fine tried pitch-2 - - - - - - - - -
    dk gewoane kop max 54 63 72 84 96 108 120 135 150
    knibbele koppen max 54.46 63.46 72.46 84.54 96.54 108.54 120.54 135.63 150.63
    min 53.54 62.54 71.54 83.46 95.46 107.46 119.46 134.37 149.37
    da max 39.4 45,5 52.6 63 71 79 87 97 107
    ds max 36 42 48 56 64 72 80 90 100
    min 35.61 41.61 47.61 55.54 63.54 71.54 79.54 89.46 99.46
    e min 30.85 36.57 41.13 46.83 52.53 62.81 74.21 85.61 97.04
    k max 36 42 48 56 64 72 80 90 100
    min 35.38 41.38 47.38 55.26 63.26 71.26 79.26 89.13 99.13
    s Nominale Grutte 27 32 36 41 46 55 65 75 85
    min 27.065 32.08 36.08 41.08 46.08 55.1 65.1 75.1 85.12
    max 27.275 32.33 36.33 41.33 46.33 55.4 65.4 75.4 85.47
    t min 19 24 28 34 38 43 48 54 60
    w min 15.3 16.3 17.5 19 22 25 27 32 34

    01-Kwaliteit ynspeksje-AYAINOX 02-Wiid berik produkten-AYAINOX 03-sertifikaat-AYAINOX 04-industy-AYAINOX

    Skriuw jo berjocht hjir en stjoer it nei ús

    relatearre produkten

    Druk op enter om te sykjen of ESC om te sluten