Globale befestigje leveransier fan oanpassingsoplossingen
Produkten
Stainless Steel Threaded Rod
Produkt beskriuwing
| Produkt Namme | 304/316 roestfrij stiel threaded rod |
| Materiaal | Makke fan 304/316 roestfrij stiel, dizze skroeven hawwe goed gemyske wjerstân en kinne mild magnetysk wêze. Se wurde ek neamd as A2 / A4-roestfrij stiel. |
| Holle type | Headless. |
| Pobjekt | Se wurde faak brûkt om druk tanks te befeiligjen, kleppen en flanges. |
| Standert | Alle moetsje Asme B18.31.3 of din 976 spesifikaasjes foar dimensjele noarmen. |
yndultaasje
Stainless Steel Threaded Rods binne lang, rjochte stangen mei triedden lâns har heule lingte. Se wurde brûkt om in befestigingspunt te leverjen of as in stabilisearjende komponint yn ferskate konstruksje, fabrikaazje, en reparaasjeapplikaasjes. It brûken fan roestfrij stiel yn threaded-stokken soarget foar korroantresistinsje, wêrtroch se geskikt meitsje foar omjouwing wêr't bleatstelling oan focht en korrosive eleminten in soargen is. Hjir binne wat mienskiplike applikaasjes foar strain stiel fan roestfrij stiel:
Bouw-yndustry:
Threaded Rods wurde brûkt yn konstruksje foar Bracing, stypjende struktueren, en ferskate komponinten ferbine.
Struktuerlike yngenieur:
Tapast yn strukturele engineering foar ferbinende balken, kolommen, en oare lading-lager-eleminten.
HVAC (ferwaarming, fentilaasje, en airconditioning):
Brûkt foar hingjen of stypjen fan HVAC-kanaal, piping, en apparatuer.
Slumbing-applikaasjes:
Wurdt brûkt yn loodgiet foar it befeiligjen fan pipen, fixtures, en oare lûke komponinten.
Duorsume enerzjyprojekten:
Threaded Rods wurde brûkt yn 'e oanlis fan wynturbine-tuorren en oare duorsume enerzjy-ynfrastruktuer.
Laboratoariumapparatuer:
Tapast yn 'e konstruksje en assemblage fan laboratoarium ynstellings en apparatuer.
Stainless Steel Threaded Rods binne te krijen yn ferskate graden, mei 304 en 316 mienskiplike keuzes wêze. De seleksje fan 'e klasse hinget ôf fan' e spesifike miljeu-omstannichheden en easken fan 'e applikaasje. Derneist, de diameter, lingte, en thread Pitch fan 'e threaded-roden moatte oerienkomme mei de behoeften fan it spesifike projekt.
Asme B18.31.3
| Thread Grutte | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | ||
| d | |||||||||||||
| P | Fit | 0,7 | 0.8 | 1 | 1 | 1,25 | 1,5 | 1,75 | 2 | 2 | 2.5 | 2.5 | |
| Fine thread | / | / | / | / | 1 | 1,25 | 1,25 | 1,5 | 1,5 | 1,5 | 1,5 | ||
| Hiel fyn thread | / | / | / | / | / | / | 1,5 | / | / | / | / | ||
| b1 | 5 | 6.5 | 7.5 | 9 | 10 | 12 | 15 | 18 | 20 | 22 | 25 | ||
| b2 | L≤125 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | 34 | 38 | 42 | 46 | |
| 125 <l≤200 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | ||
| L> 200 | / | / | / | / | / | 45 | 49 | 53 | 57 | 61 | 65 | ||
| x1 | 1,75 | 2 | 2.5 | 2.5 | 3.2 | 3.8 | 4.3 | 5 | 5 | 6.3 | 6.3 | ||
| x2 | 0.9 | 1 | 1,25 | 1,25 | 1.6 | 1.9 | 2.2 | 2.5 | 2.5 | 3.2 | 3.2 | ||
| Skroeven | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | (M45) | M48 | (M52) | ||||
| d | |||||||||||||||||
| P | Fit | 2.5 | 2.5 | 2.5 | 3 | 3 | 3,5 | 3,5 | 4 | 4 | 4,5 | 4,5 | 5 | 5 | |||
| a | Maks | 7.5 | 7.5 | 7.5 | 9 | 9 | 10.5 | 10.5 | 12 | 12 | 13.5 | 13.5 | 15 | 15 | |||
| c | min | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |||
| Maks | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | ||||
| da | Maks | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42,4 | 45,6 | 48.6 | 52.6 | 56.6 | |||
| dw | Klasse a | min | 25.3 | 28.2 | 30 | 33.6 | - | - | - | - | - | - | - | - | - | ||
| Klam B | min | 24.8 | 27.7 | 29.5 | 33.2 | 38 | 42,7 | 46.5 | 51.1 | 55.9 | 59.9 | 64,7 | 69.4 | 74.2 | |||
| e | Klasse a | min | 30.14 | 33.53 | 35.72 | 39.98 | - | - | - | - | - | - | - | - | - | ||
| Klam B | min | 29.56 | 32.95 | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71,3 | 76.95 | 82,6 | 88.25 | |||
| k | Nominaal grutte | 11.5 | 12.5 | 14 | 15 | 17 | 18,7 | 21 | 22.5 | 25 | 26 | 28 | 30 | 33 | |||
| Klasse a | min | 11.28 | 12.28 | 13.78 | 14.78 | - | - | - | - | - | - | - | - | - | |||
| Maks | 11.72 | 12.72 | 14.22 | 15.22 | - | - | - | - | - | - | - | - | - | ||||
| Klam B | min | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | 27.58 | 29.58 | 32.5 | |||
| Maks | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | 28.42 | 30.42 | 33.5 | ||||
| k1 | min | 7.8 | 8.5 | 9.6 | 10.3 | 11.7 | 12.8 | 14.4 | 15.5 | 17.2 | 17.9 | 19.3 | 20.9 | 22.8 | |||
| r | min | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | 1.2 | 1.6 | 1.6 | |||
| s | max = nominale grutte | 27 | 30 | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | |||
| Klasse a | min | 26.67 | 29.67 | 31.61 | 35.38 | - | - | - | - | - | - | - | - | - | |||
| Klam B | min | 26.15 | 29.16 | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | |||
ANSI / ASME B18.2.1
| Skroeven | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1-1 / 8 | 1-1 / 4 | 1-3 / 8 | 1-1 / 2 | |
| d | ||||||||||||||
| PP | UNC | 20 | 18 | 16 | 14 | 13 | 11 | 10 | 9 | 8 | 7 | 7 | 6 | 6 |
| INF | 28 | 24 | 24 | 20 | 20 | 18 | 16 | 14 | 12 | 12 | 12 | 12 | 12 | |
| 8-UN | - | - | - | - | - | - | - | - | - | 8 | 8 | 8 | 8 | |
| ds | Maks | 0.26 | 0.324 | 0.388 | 0.452 | 0.515 | 0.642 | 0.768 | 0.895 | 1.022 | 1.149 | 1.277 | 1.404 | 1.531 |
| min | 0.237 | 0.298 | 0,36 | 0.421 | 0.482 | 0.605 | 0.729 | 0.852 | 0.976 | 1.098 | 1.223 | 1.345 | 1.47 | |
| s | Maks | 0.438 | 0,5 | 0.562 | 0.625 | 0.75 | 0.938 | 1.125 | 1.312 | 1,5 | 1.688 | 1.875 | 2.062 | 2,25 |
| min | 0.425 | 0.484 | 0.544 | 0.603 | 0.725 | 0.906 | 1.088 | 1,269 | 1.45 | 1.631 | 1.812 | 1.994 | 2.175 | |
| e | Maks | 0,505 | 0.577 | 0.65 | 0.722 | 0.866 | 1.083 | 1.299 | 1.516 | 1.732 | 1.949 | 2.165 | 2.382 | 2.598 |
| min | 0.484 | 0.552 | 0.62 | 0.687 | 0.826 | 1.033 | 1.24 | 1.447 | 1.653 | 1.859 | 2.066 | 2.273 | 2.48 | |
| k | Maks | 0.188 | 0.235 | 0.268 | 0.316 | 0.364 | 0.444 | 0.524 | 0.604 | 0,7 | 0.78 | 0.876 | 0.94 | 1.036 |
| min | 0,15 | 0.195 | 0.226 | 0.272 | 0.302 | 0.378 | 0.455 | 0.531 | 0.591 | 0.658 | 0.749 | 0.81 | 0.902 | |
| r | Maks | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.06 | 0.06 | 0.06 | 0,09 | 0,09 | 0,09 | 0,09 | 0,09 |
| min | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | |
| b | L≤6 | 0.75 | 0.875 | 1 | 1.125 | 1,25 | 1,5 | 1,75 | 2 | 2,25 | 2.5 | 2,75 | 3 | 3,25 |
| L> 6 | 1 | 1.125 | 1,25 | 1.375 | 1,5 | 1,75 | 2 | 2,25 | 2.5 | 2,75 | 3 | 3,25 | 3,5 | |
| Skroeven | 1-5 / 8 | 1-3 / 4 | 1-7 / 8 | 2 | 2-1 / 4 | 2-1 / 2 | 2-3/4 | 3 | 3-1 / 4 | 3-1 / 2 | 3-3/4 | 4 | |
| d | |||||||||||||
| PP | UNC | - | 5 | - | 2004/1/2 | 2004/1/2 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| INF | - | - | - | - | - | - | - | - | - | - | - | - | |
| 8-UN | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | |
| ds | Maks | 1.658 | 1.785 | 1.912 | 2.039 | 2,305 | 2.559 | 2.827 | 3.081 | 3.335 | 3.589 | 3.858 | 4.111 |
| min | 1.591 | 1.716 | 1.839 | 1.964 | 2.214 | 2.461 | 2.711 | 2.961 | 3,21 | 3.461 | 3.726 | 3,975 | |
| s | Maks | 2.438 | 2.625 | 2.812 | 3 | 3,375 | 3,75 | 4.125 | 4,5 | 4.875 | 5.25 | 5.625 | 6 |
| min | 2.356 | 2.538 | 2.719 | 2.9 | 3.262 | 3.625 | 3,988 | 4.35 | 4.712 | 5.075 | 5.437 | 5,8 | |
| e | Maks | 2.815 | 3.031 | 3.248 | 3.464 | 3.897 | 4.33 | 4.763 | 5.196 | 5.629 | 6.062 | 6.495 | 6.928 |
| min | 2.616 | 2.893 | 3.099 | 3.306 | 3,719 | 4.133 | 4.546 | 4.959 | 5.372 | 5.786 | 6.198 | 6.612 | |
| k | Maks | 1.116 | 1.196 | 1.276 | 1.388 | 1.548 | 1,708 | 1.869 | 2.06 | 2.251 | 2.38 | 2.572 | 2.764 |
| min | 0.978 | 1.054 | 1.13 | 1.175 | 1.327 | 1.479 | 1.632 | 1.815 | 1.936 | 2.057 | 2.241 | 2.424 | |
| r | Maks | 0,09 | 0.12 | 0.12 | 0.12 | 0,19 | 0,19 | 0,19 | 0,19 | 0,19 | 0,19 | 0,19 | 0,19 |
| min | 0.03 | 0.04 | 0.04 | 0.04 | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 | |
| b | L≤6 | 3,5 | 3,75 | 4 | 4,25 | 4.75 | 5.25 | 5,75 | 6.25 | 6,75 | 7.25 | 7.75 | 8,25.25 |
| L> 6 | 3,75 | 4 | 4,25 | 4,5 | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 | |
